[Return to main site] 

Getting Started


Getting Started & Forum Rules (2)
Need to Calibrate Z-Zero when Using a New PSP Resin Container (5)

When switching to another resin container, please check the Z zero again. The silicone thickness may have some variations. Version two PSP comes with a silicone that is softer and much stickier. If the build platform…

First Print Checklist and PSP Handling Instructions (3)

For new users, we recommend printing smaller prints first. Our calibration sample is a great first print: http://www.kudo3d.com/forums/topic/calibration-sample-for-optimizing-printing-parameters/ It is best not to pr…

"Print" button not responding on PC (3)
Bean powered off [SOLVED] (4)
Can`t connect to kudo3d.local/# (3)
Print not sticking to platform (15)
New user of the upcoming Bean 3d (8)
¿anyone with kudo titan 2? (4)
My second semi succesfull print (6)
Prepare model to print? (1)
Can't send the print order to the printer (3)
Getting Started Guide (1)
Model was way out (8)
Questions on my first print not adhering to build plate (14)
A tip to remove scattered cured resin stuck on the vat floor (1)
I need some ideas how to ventilate (5)
CW "default.slicing" file question (2)
Print does not stick (3)
PSP1 vs PSP2 vat (10)
Probleme with :Z / shutter and fan (8)
Italian owners of Titan 1 for sharing experiences ( 2 3 ) (46)
Loading model to printer (2)
Clean the print out with water (4)
Monitor resolution vs Slice vs Projector (2)
Z-axis unresponsive (4)
Titan 2 Network security key? (2)
Printing from SD card? (2)
Connectivity Issues (2)
German owners of Titan 1,......get in here! (11)