[Return to main site] 

Failed Print with Version 1 PSP Resin Container


#1

Many new users are setting the wrong height for the projector, improper parameters, or suboptimal base thickness or supports. As a result, the model either will not stick to the build platform or drop during printing.

If users don’t stop printing right away, a big chunk of resin will be cured on the resin container floor. The shrinkage will distort the Teflon film and lift it off the silicone material. We have solved this issue with our version 2 PSP resin container.

For those who are using the version 1 PSP, please inspect all parameters and setup before pushing the “run” button. If you would like us to help review your parameters, please contact us directly:

Thanks!
-Kudo3D Team